Commercial and Architectural
SECTORS C2 – C3
Commercial and Architectural
A wide commercial market range of coatings, flooring and fire protection products. In this sector, appearance and cleanability are specification requirements as much as technical performance.
TYPICAL LOAD · Foot traffic, cleaning, aesthetic expectations
RISK ANALYSIS
This is where corrosion comes from.
- Heavy foot traffic and surface wear
- Frequent cleaning and detergent exposure
- Retaining colour and gloss over the long term
- Fire regulation requirements
RECOMMENDED SYSTEM
Coating build-up.
The layer build-up typically used in this sector. Values are indicative; the final system is determined by the site inspection report and the product technical data sheet.
PrimerEpoxy primer
80 µm
Finish / TopcoatPolyurethane
60 µm
TOTAL DFT140 µm
CATEGORYC2 – C3
Indicative system example.
APPLICATION AREAS
Where is it used?
Shopping centre and office steel structures
Car park structures
Stairs, railings and joinery
Warehouses and logistics centres
Façade elements
POINTS TO NOTE
- Resistance to cleaning chemicals determines topcoat selection
- If fire protection is required, passive protection is planned separately
- Different systems should be designed for floors and steel
FOR YOUR COMMERCIAL AND ARCHITECTURAL PROJECT
Free site inspection report →
Let us see the site and choose the system together
Let us assess your existing coating against ISO 12944 and report on the risks and more efficient solutions. The site inspection report is free of charge.
