Agricultural and Construction Machinery
SECTORS C3 – C4
Agricultural and Construction Machinery
Durable topcoat systems for vehicle-mounted equipment, agricultural machinery and general industry. On these products, the coating is both protection and brand appearance.
TYPICAL LOAD · Fertiliser/chemical contact, scratching, UV
RISK ANALYSIS
This is where corrosion comes from.
- Contact with fertilisers and agricultural chemicals
- Scratching from stones and branches
- Long-term outdoor UV exposure
- Moisture during end-of-season storage
RECOMMENDED SYSTEM
Coating build-up.
The layer build-up typically used in this sector. Values are indicative; the final system is determined by the site inspection report and the product technical data sheet.
PrimerZinc phosphate epoxy
60 µm
Finish / TopcoatPolyurethane
60 µm
TOTAL DFT120 µm
CATEGORYC3 – C4
Indicative system example.
APPLICATION AREAS
Where is it used?
Tractor and combine harvester bodies
Trailers and tank equipment
Vehicle-mounted equipment
Irrigation systems
Storage and silo equipment
POINTS TO NOTE
- Choose a polyurethane topcoat for UV resistance
- Increase film thickness in areas exposed to chemicals
- Colour consistency should be monitored for brand perception
FOR YOUR AGRICULTURAL AND CONSTRUCTION MACHINERY PROJECT
Free site inspection report →
Let us see the site and choose the system together
Let us assess your existing coating against ISO 12944 and report on the risks and more efficient solutions. The site inspection report is free of charge.
